Advanced Piping Solutions

Reinforced Concrete (RC) Pipes, Jacking Pipes & Manholes

Our plain, lined and coated and micro tunneling reinforced concrete pipes are either machine-made or manufactured using the wet-cast and dry-cast method. RC pipes are designed to withstand large external and axial loads for trench and micro tunneling operations respectively.

Our pipes will not collapse, crack, buckle or deflect under the impact of imposed heavy loads. Simple and economical to install, our RCP pipes do not need specialback fill material. Our RCP pipes are used for storm drains, sanitary sewers,effluent, culverts, industrial discharge lines and micro tunneling operations.

RC pipes are produced in diameters ranging from 300mm to 3500mm in addtion to manholes with different diameters range as per customer request.

Product Range

Size 300m 3500mm
Length 2.5m , 3m
Pressure Class (Gravity)



Reinforced Concrete (RC) Pipe is recognized by Engineers, Contractors and specifying agencies as the most resistant and economic of all piping products. RC Pipes are specifically designed and used for the following many uses:

  • Storm sewers
  • Sanitary sewers
  • Culverts
  • Industrial waste
  • Irrigation
  • Gravity water supply
  • Jacking & Micro tunnelling operations


RC Pipes are the strongest pipe
available in the market. It can be designed and plant tested to resist any live and dead load required. It relies primarily on its inherent brute strength manufactured into the pipe.

RC Pipes are most durable and long-lasting pipe
that has been extensively used for underground usage throughout the globe. Properly installed, the service life for concrete culverts, storm sewer and sanitary sewer can exceed more than 100 years.

RC Pipes have an ultra-smooth interior wall surface
which means the capacity specified is the capacity achieved.

RC Pipes require little or no maintenance and offers
the greatest long-term value.

RC Pipes are not combustible
and therefore will not hold flame after fire has been introduced into the drainage system.

RC Pipes have a high impact resistance.
It is not prone to damages that require site repairs during unloading and installation.


These specifications cover reinforced concrete pipe intended to be used for the transmission of storm sewers, storm waters, industrial waste, and for the construction of the culverts:

  • ASTM C76 M : Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe.
  • ASTM C361 M- Reinforced Concrete Low-Head Pressure pipe.
  • ASTM C14 M- Concrete Sewer, Storm Drain, and Culvert Pipe.
  • BS 5911: part 100- Specification for Pipe and Fittings with flexible Joints.
  • BS 5911: part 120- Specification for jacking pipe.
  • AWWA C302-Reinforced Concrete Noncylinder Pipe.
  • ASTM C478 M-Precast Reinforced Concrete Manhole Sections.